GearShop

Map152

 3/4" 13 ply Birch construction

Great sounding cabinet. Good lows and a well matched crossover so you don't have a horn that bites your head off, yet it can still be heard quite well from a distance. We use a flare 7x14 horn for good dispersion and a high power compression horn driver (you won't be smokin mids here). We build our cabinets to the spec of the woofers so you will see good bass response without a ton of port air flutter. We use our very own specially designed HB crossover in our cabinets. Crossing over at around 4000hz for good clear highs without the irritating sound of doubling up at around 2khz like so many other cabinets.

Bass response is key in our sound. So many pro PA cabinets today just don't have the lows needed. We tune our cabinets and make our crossovers to bring out all the lows our woofers can offer.

We use our PHD002t Titanium horn driver for the best high frequency sound in an affordable cabinet.

Each HB crossover is specifically made for each of our cabinets. There is really no driver that is the same, plus when you add cabinet volume and ports, crossover design becomes the most important factor in any PA cabinet. This particular cabinet uses our C-1 18db per octave crossover network.

 Made for the PRO musician by PRO musicians.

All metal hardware, 16 gauge steel grill, dual 1/4" inputs, Speakon inputs,  heavy duty  black carpet. 7x14" lip horn lens and titanium horn driver with built in 2 way 18db per octave crossover. Also includes two abs 4x5 ports, 1 3/8" metal 3" deep tripod mount and rubber feet.

1 year warranty