|

Map2123
3/4" 13 ply Birch construction
This is an amazing mid/high cabinet. Probably
one of the best sounding cabinets out there. With a sub underneath,
it IS perfect! However, stand alone, it can handle anything.
The dual 12" design is now becoming a more popular item to
go with for stage sound as well as for DJ work etc... 12's are
fast, they are not all mushy like 15's. They can reproduce bass
though. There are so many pluses when dealing with 12's instead
of 15's. This particular cabinet is designed perfect for a small
pa or to run some 18" bottoms under them and really fill
up any size stage. Rated at 800 watts rms, these little monsters
can handle just anything. If you are looking for accuracy, clean
sound, look no further. Match with any cabinet anywhere, we guarantee
the best!
We use our very own specially designed HB crossover
in our cabinets. Crossing over at around 4000hz for good clear
highs without the irritating sound of doubling up at around 2khz
like so many other cabinets.
Bass response is key in our sound. So many pro
PA cabinets today just don't have the lows needed. We tune our
cabinets and make our crossovers to bring out all the lows our
woofers can offer.
Each HB crossover is specifically made for each
of our cabinets. There is really no driver that is the same, plus
when you add cabinet volume and ports, crossover design becomes
the most important factor in any PA cabinet. This particular cabinet
uses our C-4 12db per octave crossover network.
The cabinet is a vented design using two 3x5 ports
located at the bottom, 2.0 cubic feet total, trap shape.

All metal hardware, 16 gauge
steel grill, two 1/4" inputs, one Speakon inputs. Heavy duty
black carpet. 7x14" horn lens and Titanium horn driver with
built in 2 way crossover. 1 3/8" tripod mount.
| RMS
POWER |
1000 |
| MUSIC
POWER |
2000 |
| OHM
LOAD |
4
ohm |
| FREQ.
RESPONSE |
40
- 20,000hz (crossover cut at 4000hz |
| EFFICIENCY |
105db |
| SIZE |
14"
wide x 34" tall x 14" deep |
| DRIVERS |
2
Madison Executioner 12's and PHD008t Titanium horn
driver |
| VOICE
COIL/S |
4"
aluminum |
| MAGNET
SIZE |
100
oz. |
be4 tbody>
|