Map2153
3/4" 13 ply
Birch construction
Serious true watt power handling and awesome
sound quality. Our tuned dual 15 cabinet produces clean
bass response without port noise. The highs on this
cabinet are very evenly matched with 15 drivers. Go
ahead run the whole band through a pair of em, we don't
care, they will handle it. This is a great speaker
and is truly under rated. These woofers handle just
tons of abuse. Also includes Speakon connections.
We use our very own specially designed
HB crossover in our cabinets. Crossing over at around
4000hz for good clear highs without the irritating sound
of doubling up at around 2khz like so many other cabinets.
Bass response is key in our sound. So
many pro PA cabinets today just don't have the lows
needed. We tune our cabinets and make our crossovers
to bring out all the lows our woofers can offer.
Each HB crossover is specifically made
for each of our cabinets. There is really no driver
that is the same, plus when you add cabinet volume and
ports, crossover design becomes the most important factor
in any PA cabinet. This particular cabinet uses our
C-4 12db per octave crossover network.
Made for the PRO musician by PRO musicians.
All metal hardware,
16 gauge steel grill, dual 1/4" and dual speakon
inputs, heavy duty black carpet. 7x14" horn
lens and Titanium horn driver with built in 2 way crossover.
Also includes four abs 3x5 ports and rubber feet.
| RMS
POWER |
1000 |
| MUSIC
POWER |
2000 |
| OHM
LOAD |
4 ohm |
| FREQ.
RESPONSE |
30 - 20,000hz (crossover cut at
4000hz |
| EFFICIENCY |
105db |
| SIZE |
19" wide x 46" tall x
16" deep |
|
DRIVERS |
2 Madison Executioner 15's and
PHD008t Titanium horn driver with
protection circuitry |
| VOICE
COIL/S |
4" |
| MAGNET
SIZE |
d22
100 oz. |